industries corp. 5625-a s. arville, las vegas, nv 89118 tel:702-364-9998 fax: 702-364-1562 www.magt echind.com anz107f 7.87 [200.0] 0.98 [25.0] 8.27 [210.0] 8.43 [214.0] 0.49 [12.5] 0.87 [22.0] 0.16 [4.0] 0.25 [6.2] r0.08 [r2.0] led driver product specifications anz#: z107f, may 18, 2009 lp1017-xx series switch-mode led driver total power 17 watts input voltages 90 ~ 264 vac or 100-277vac number of outputs one special features electrical specifications ? ul48, class 2 compliant ? single output, constant current or constant voltage design ? ip66 compliant ? suitable for dry or damp locations ? designed for outdoor or indoor applications ? convection cooled in plastic enclosure ? compact, lightweight ? active pfc reduces power consumption input range frequency power factor crest factor inrush current input current efficiency emi filtering maximum power current accuracy load regulation leakage current hold up time protection 90 ~ 264 vac, full range or 100~277vac 47 to 63 hz > 0.92 at full load, 115vac 1.5 max. 10.0 amps maximum at 230vac, cold start, 25o c 0.3 amps maximum at 115vac 82% typical at maximum load 47cfr, part 2, part 15 and cispr pub, 22 class b 17w 1% (when applicable) 3% 300ua typ. half cycle minimum at 120 vac and 80% of rated load over-voltage, over current and short circuit protection: auto-recovery environmental operating temperature: -30 to 60 o c (de-rating : 1% per o c from 60~70oc ) storage temperature: -40 to +85o c humidity (non-condensing): 5% to 95% cooling: convection vibration frequency: 5 to 50 hz mtbf: >100,000 hours at full load and 25oc ambient conditions (mil-217f) emc : compliant to 47cfr, part 2, part15 and cispr pub, 22 class b safety ul ul48, class 2 compliant cul cul48, class 2 compliant ce model number constant volta g e mode model number constant current mode out p ut out p ut v ( dc ) a ( ma ) watts v ( dc ) a ( ma ) watts lp1017-36 36 , 5% 470 17 lp1017-36-c0470 18~ 36 470 , 5% 17 lp1017-24 24 , 5% 700 17 LP1017-24-C0700 12~ 24 700 , 5% 17 lp1017-12 12 , 5% 1400 17 lp1017-12-c1400 6 ~ 12 1400 , 5% 17 note: the output current of constant current models are adjustable at factory from 50% ~ 100%. the minimum load required is 40% for the constant voltage versions. mechanical drawing
|
